I don’t believe all raccoons live near roads. It is entirely possible for some animals to have minimal or no contact with human infrastructure. The world is a big place even if it feels small at times.

Country raccoons aren’t aware of the dangers of motor vehicles. City raccoons would have been taught by their mother how to wait and avoid such obstacles. Foraging for food in bins is also a lot different than hunting for food in a more wild setting. The diets are vastly different with the mother again showing the young how to search and obtain food in their respective environments.

Yes, racoons can teach each other but from my understanding, a lot of that teaching is from mother to child.

I do not expect a city human to be able to head into the wild and survive without a considerable amount of training before heading out. A wild human would have a difficult time adjusting to the city life without starting out with some money.

I still stand by my original statement unless I can be proven otherwise.

I watched a documentary about racoons. It mainly focused on raccoons that live in the city and how they adapted to city life. City raccoons adapted so well that city racoons and country raccoons would not be able to survive in each other’s world.

If I recall correctly, cities helped the spread of racoons throughout North America. Any animal that has is able to adapt so easily is far more clever than we give them credit for.

And since they aren’t bound by human laws, I fully support them in vandalising and trashing these Cyber Truck monstrosities. I’m eternally jealous that they can look so cute while accidentally rebelling against Musk.

This game has caught my eye. The visual style alone is what really draws me in to the world.

There’s something about the Half-Life-ish graphics and unique style that sort of hits a personal nostalgia for me. It has a wonderful combination of weird and abstract with a touch of familiarity. It also feels both vibrant and gritty at the same time. Something I didn’t realize I was missing so much. Especially after playing Baldur’s Gate 3 which has absolutely gorgeous but very busy graphics.

After I get over my Caves of Qud hyperfixation, I am definitely going to pick this game up.

For a little background, I worked in the field for about 5-6 years, half the time as a contractor/helper, and the other half as an apprentice (which I never completed). The company built automation lines which primarily did metal welding. High voltage spot welding, Automated MIG welding and Laser welding/braising.

As for wastefulness, I don’t even know where to start and I am sure I will miss a bunch of things. In no particular order of importance:

1. Automation requires A LOT of materials. Pipes, cables, trays, robots, supports, safety, devices, fasteners and the list goes on. Keep in mind that All these materials need to be extracted, transported, refined and remade into what we need to build an automation line.

2. Automation is Heavily dependent on fossil fuels. We need machines to extract raw materials. We need machines to transport raw materials. We need machines and heat to refine raw materials. We need machines and heat to create a final product. We need to transport those final products and then we can finally work with that final product to install into an automation line. Some materials that we work with such as cables, hosing and tubing will create some sort of waste during the installation process. Maybe not as much as the other steps but it all adds up in the end.

I worked in electrical and all of our cables would have some sort of plastic/rubber/silicone sheathing. I honestly don’t know how we can expect to keep up with the growing electrical demand AND cut down on crude oil extraction. We need insulators to safely use electricity and plastics do that job very well.

I don’t know how resource extensive it is to make a microprocessor, but I imagine it still takes a lot of machinery and heat to create them. Microprocessors are in a lot of devices used in automation.

3. Wear and tear on mechanical parts. Robots are great for doing repetitive tasks. Robots and anything that moves (conveyors or clamps, for example) will involve moving parts. Anything with moving parts will wear down eventually. Those parts are generally trashed and replaced with a functioning part.

4. Electronic Devices. Computers, PLC (Programmable Logic Controllers), Sensors, power supplies, transformers, lights, and HMI (Human-Machine Interface) are some of the devices used in automation. Lots of plastics, metals and microprocessors. Since these are electronic devices, they need to be shipped in plastic to ensure the devices are free from moisture or shock damage. The plastic wrapping and plastic shock foam pads that have no purpose after the device has been removed from the packaging get thrown out.

5. Shipping. Everything coming in or leaving has to be shipped. For smaller items, they may be bundled up on a transport skid which may mean it is wrapped in layers and layers of shipping plastic wrap in order to secure the load. Larger items may require plastic or metal tie-down straps. All of which are disposed of after use. Robots, tooling, fencing, piping, cables, power disconnects and so on are VERY heavy. All this weight requires so much fuel to transport from place to place before reaching the final installation site.

6. Reusing vs. replacing. Depending on the request, we may reuse old robots or tools but in many cases, A LOT of old, still usable material just gets chucked into the trash. Companies care less about waste and more about downtime. It’s far quicker to tear out the old, bring in new cables/piping/tray, slap it in and get that power running as soon as possible.

7. Weight. Things are getting heavier. Heavier stuff means bigger robots. Bigger robots require more power. You can probably look back at some previous points to understand why the extra weight is not good.

8. Energy consumption. As we push further into automation, we require more electrical power. Before I left my company, the power demand was increasing at a mind blowing rate. Towards the end of my time there, I spent months with a couple other people prepping high voltage power main disconnects. When I first started there, there was only one person prepping disconnects when the demand required it.

9. Oils and fumes. Moving parts generally require lubrication. Greases and oils are generally not so nice to the environment considering the actions required to handle, dispose of, or clean up oil. Lots of fumes are created from welding metal together and it’s pretty nasty stuff. My patience with that company disappeared after they started welding aluminum without filtering the aluminum welding fumes.

10. Management are prideful idiots. The dingleberries that run the place have no idea what they are doing and have no idea what it takes to build an automation line. Some of their mistakes cost millions of dollars in wasted materials and all that shit just gets chucked. It’s fucking mind blowing.

I’m sure there’s more but my brains done with this for now. Automation is super cool and fun to watch when all is done and it’s running. It can definitely push out higher production numbers compared to humans. It is definitely not as green or sustainable as any tech company would want you to believe. I believe, from my perspective and experiences in that field, it’s an unsustainable disaster. If it seems like a green alternative, it’s because we aren’t talking about the resource requirements to build, maintain and upgrade automation systems and only focusing on the production output.

Personally, I believe our green alternatives shouldn’t depend on green technology but rather draw heavy inspiration from nature itself. The hard part about that is imagining a life that isn’t intertwined with capitalism, money and hierarchy. Once we shrug off those evils, we can start to observe and listen to nature again.

I had to leave the automation industry because othe reckless waste of resources the automation industry requires. It was becoming an unbearable burden on my mind.

I thought I was being smart by using this company as a way to quickly get my electrical apprenticeship completed. Get in, get out then find somewhere quiet to live. Instead, I got used up and discarded while the entire time being treated like the dirt under a pile of shit. My prize for attempting to game capitalism, even in the smallest of ways.

Since my youth, I had been lectured in school about the dangers of climate change. The only news I ever gave any attention to was environmental news. When I was in my early/mid 20’s, I made many changes to my lifestyle and future plans based on the fact that my elder years would be on a planet ruined by industrialization.

But everything is happening faster than expected. When COVID entered the global scene in 2020 and I saw the disorganized and uncooperative response from governments and corporations, I entered a state of existential dread. Once again, my future plans were cut short. Very short. By emotionally stunted children in positions of power. And the near future these very same people are creating is just depressing.

I don’t do much these days. I keep it simple. I don’t feel bad about how little I do. Small as it seems, doing less makes me feel less disgusted by my impacts on this planet. The way I look at it, if capitalism always demands positive accumulation of productivity and resources then the opposite, doing less, is a radical act of defiance against capitalism itself. I don’t need this justification, it just amuses me. I’m much happier now by doing less because doing less makes me content. On top of that, my mind is plagued with a lot less guilt knowing I’m not actively working against the environment for the sake of making a paycheck.